Accessories

Check availability

High temperature assembly paste

This paste is charged with micronized metals (copper and aluminum), solid lubricant and mineral oil. This product has been designed to secure the installation and protection in extreme conditions of temperature and atmospheric or chemical corrosion.
It supports heat transfer between the heater and the workpiece.
Operating temperature of -25 ° C to 1000 ° C.
Packaging tube 140gr.
code:
Directions: Do not replace a bore too large. Do not put grease on the cables or head of the cartridge heaters.

High temperature cable

Siliconized Fiber glass insulated
Good resistance to thermal shocks
Excellent aging resistance
Good behavior to usual chemical atmospheres.
Operating voltage 500V
Test voltage 2000V
According to DIN 17753, DIN 17740 and ASTM B160

Copper Conductors – continuous use temperature of -60 ° C to +280 ° C, 350 ° C.

Nominal section mm²	Composition	Packaging minimum	Code
0.75	24 x 0.20
1	32 x 0.20
1.5	30 x 0.25
2.5	50 x 0.25
4	56 x 0.3

Nickel driver _ temperature of continuous use of -60 ° C to +350 ° C, up to 400 ° C

Nominal section mm²	Composition	Packaging minimum	Code
0.5	7 x 0.30
0.75	11 x 0.30
1	14 x 0.30
1.5	21 x 0.30
2.5	35 x 0.30
4	56 x 0.30

High Temperature Sheath

Fiberglass braided sleeving with silicone rubber coating 1.5 to 2 kV.
Continuous operating temperature -60 ° C to +250 ° C – Peaks at 290 ° C.
Good resistance to moisture, ozone and UV.
Good resistance to usual chemical atmospheres.
Self-extinguishing.
Very flexible.
IEC 684-1, EN 60684-1 and IEC 684-2

Inner diameter (mm)	Tolerance (mm)	Wall thickness mini (mm)	Wall thickness maxi (mm)	Packaging mini(m)
1.5	±0.20	0.15	0.6	100
2.5	±0.20	0.15	0.65	100
3.5	±0.25	0.15	0.65	100
4.5	±0.25	0.20	0.65	100
6	±0.25	0.2	0.65	100
8	±0.25	0.2	0.65	100

Resistive Wire

Nickel-Chrome alloy for use up to 1150 ° C.
Chemical composition: 20Cr 80Ni
Melting point: 1400 ° C
Specific heat at 20 ° C: 0.46 kJ / kg.K
Thermal conductivity at 100 ° C: 15 W / m.K
Specific gravity: 8.41 kg/dm3
Resistivity at 20 ° C: 1.08 Ω.mm ² / m
Multiplication factor of the resistor at 20 ° C to determine the resistance according to the temperature.

Temp. °C	20	100	200	300	400	500	600	700	800	900	1000	1100
Factor	1.000	1.017	1.035	1.051	1.062	1.069	1.066	1.063	1.062	1.067	1.071	1.077

Ø	Weight in g/m	Resistivity at 20°C ohm	Packaging minimum in kg*	Code
0,045	0.0134	702	0.08
0,05	0.0163	515	0.2
0,055	0.0194	444	0.2
0,06	0.0236	400	0.2
0,065	0.0278	343,7	0.2
0,07	0.0322	284	0.2
0,075	0.0370	238	0.2
0,08	0.0420	223	0.2
0,09	0.0520	177	0.4
0,1	0.0663	135	1
0,11	0.0789	115	1
0,12	0.0939	96,4	1
0,13	0.11	82,1	1
0,14	0.128	70,8	1
0,16	0.147	53,71	1
0,18	0.211	41,92	1
0,2	0.261	34,7	1
0,22	0.316	28,7	1
0,23	0.345	25,4	1
0,24	0.375	24,1	1
0,25	0.407	22,2	1
0,26	0.441	20,5	1
0,28	0.511	17,7	3
0,3	0.587	15,4	3
0,32	0.70	13,7	3
0,36	0.85	10,59	3
0,4	1.04	8,435	3
0,45	1.32	6,85	3
0,51	1.7	5,28	3
0,57	2.15	4,173	3
0,64	2.75	3,337	3
0,72	3.45	2,625	3
0,81	4.35	2,082	3

* Minimum packaging, subject to availability, the coils are not repackaged.

Ceramic Domino

Contact en laiton étamé.
Type	Dimensions	Bornes	Packing	Code
2 poles 6mm²	24x21x16	Ø3.2	10	ACBS1
2 poles 16mm²	33x30x23	Ø6	10	ACBS2
3 poles 16mm²	50x30x23	Ø6	10	ACBS3

Ceramic Plug

2 poles + ground 400Volts, 25A.
Broches Ø6mm, between axis 19mm, silver contact.
Aluminium body.

Type	Conditionnement mini	Code
Straight		ACFFRE8
Bent		ACFFTE8

Silicon Plug

2 connectors + ground 250Volts, 16A.
Broches Ø6mm, between axis 19mm, nickel-plated steel.

Continuous service temperature of 200 ° C,
peaks at 300 ° C.
Silicone body.

Type	Conditionnement mini	Code
Droite		ACSIRE8
Coudé		ACSITE8

Silicon Plug – 400V – « New »

2 connectors + ground 400Volts, 25A.
Broches Ø6mm, between axis 19mm, nickel-plated steel.